Stainless Steel Electric Heating Tube For Electroplating

Introduction:

The stainless steel electric heating tube is made of metal tube, and the spiral electric heating alloy wire (nickel chrome, 

iron chrome alloy) is uniformly distributed along the center of the tube. The gap is filled with magnesia sand with good 

insulation and thermal conductivity. Silicon or ceramic seal. 220V stainless steel electric heating tube is an electrical component 

that converts electrical energy into heat energy. Because of its low price, convenient use, convenient installation and no pollution, 

it is widely used in various heating occasions.

Stainless steel electric heating tube features:

1. The stainless steel electric heating tube is made of metal tube as the outer shell, and the spiral electric heating alloy wire 

(nickel chrome, iron chrome alloy) is uniformly distributed along the center of the tube. The gap is filled and compacted with 

magnesia sand with good thermal conductivity and thermal conductivity. The end is sealed with silicone or ceramic. This metal 

armored heating element can heat air, metal molds and various liquids. The high-temperature resistance wire is uniformly distributed 

in the high-temperature resistant stainless steel seamless tube, and the crystalline magnesium oxide powder having good thermal conductivity and insulation performance is densely filled in the void portion, and the structure is not only advanced, but also has high thermal efficiency and uniform heat generation, when high temperature resistance When there is a current in the wire, the generated 

heat is diffused to the surface of the metal tube by the crystalline magnesium oxide powder, and then transferred to the heated 

member or the air to achieve the purpose of heating.

2. Small volume and high power: The Electric Heater mainly uses clustered tubular heating elements, and each bundled tubular 

electric heating element has a power of 5000KW.

3. Fast thermal response, high temperature control accuracy and high comprehensive thermal efficiency.

4. Wide application range and adaptability: The circulating heater can be used for explosion-proof or general occasions. Its explosion-proof grade can reach Grade B and Grade C, and its pressure resistance can reach 10Mpa. It can be installed vertically or horizontally according to the user's needs.

5. High heating temperature: The heater is designed to work at temperatures up to 850 ° C, which is not available in general heat exchangers.

6. Fully automatic control: Through the design of the heater circuit, it is convenient to realize automatic control of parameters such as outlet temperature, pressure, flow rate, etc., and can be networked with a computer to realize man-machine dialogue.

7. Long life and high reliability: The heater is made of special electrothermal material, and the design power load is reasonable. The heater adopts multiple protections, which greatly increases the stability and life of the heater.

Anticorrosion Pigments, Inkjet Receptive Coating, Matting Agent