Powder Silicon Dioxide For Disperse Dyes Printing Thickener

Feature

Silicon dioxide powder can be used as a Thickener for disperse dyes printing. Disperse dyes are a type of dye that is insoluble 

in water and requires a dispersing agent to be able to spread evenly on the fabric. Silicon dioxide, also known as silica, can 

act as a dispersing agent and thickener for disperse dyes.

To use silicon dioxide powder as a thickener for disperse dyes printing, follow these steps:

1. Prepare the disperse dye solution: Dissolve the disperse dye in a suitable solvent, such as ethyl acetate or acetone, according 

to the manufacturer's instructions.

2. Add silicon dioxide powder: Gradually add the silicon dioxide powder to the disperse dye solution while stirring continuously. The

amount of silicon dioxide powder to be added depends on the desired viscosity or thickness of the printing paste. Start with a small

amount and gradually increase until the desired consistency is achieved.

3. Mix thoroughly: Continue stirring the mixture until the silicon dioxide powder is fully dispersed and no lumps or clumps are present. 

This may require some time and vigorous stirring to ensure a smooth and homogeneous paste.

4. Test the printing paste: Take a small amount of the printing paste and apply it to a test fabric or sample. Check the consistency, 

color intensity, and printability of the paste. Adjust the amount of silicon dioxide powder if necessary to achieve the desired results.

5. Print on the fabric: Once the printing paste is ready, use the desired printing technique, such as screen printing or block printing, 

to apply the paste onto the fabric. Ensure proper drying and curing of the printed fabric according to the dye and fabric manufacturer's

instructions.

Inkjet Receptive Coating, Anticorrosion Pigments, Matting Agent防腐颜料、 接受涂料、 消光剂