Heat exchanger manufacturer tells you the replacement sequence of heat exchanger gasket

After we have used the heat exchanger for a long time, we need to replace some parts, gasket is one of them, the following is to introduce the specific replacement order.This should be done in the following order

1. Remove the waste gasket of the heat exchanger. Please note that there shall be no scratches in the gasket groove during the disassembly.

2. Use acetone, butanone or other ketone solvent to remove residual glue in gasket tank.

3. Clean the gasket slots and gaskets with a clean cloth or cotton yarn.

4. Apply the adhesive evenly in the gasket groove.

5. Put clean new gaskets on the board.6. The heat exchanger plates affixed with gasket shall be placed in a flat, cool, ventilated place and naturally dry for 4h before installation and use.

At present, heat exchanger is widely used and has a good prospect of development.That's all for today, I hope you can get some help, stay tuned and learn more.

It is important to note that the specific replacement sequence may vary depending on the type and design of the heat exchanger. Always refer to the manufacturer's instructions and guidelines for the particular heat exchanger model being worked on.

Anticorrosion Pigments, Inkjet Receptive Coating, Matting Agent